Inquiry
Form loading...
5725-5880MHz 30W RF Power Amplifier Module with Built-in SDR White Noise Source
PA+Signal Generator

5725-5880MHz 30W RF Power Amplifier Module with Built-in SDR White Noise Source

ZDTECH 5725-5880MHz 30W RF power amplifier with built-in SDR white noise source delivers 30~35W saturated power, ±1.5dB flatness and -40dBc spurious rejection. RS422 serial port supports white noise, comb spectrum, OFDM, LFM modulation. It has over-temperature/voltage/current protection with 24-32V wide DC supply, ideal for 5.8GHz RF interference test.

    ZDTECH 5725-5880MHz 30W RF power amplifier module integrates built-in SDR signal source, which outputs Gaussian white noise by default and supports four modulation modes including comb spectrum, OFDM and LFM. It provides 30~35W saturated output power with ±1.5dB gain flatness and -40dBc spurious rejection, matched with 50-ohm output impedance. Powered by 24~32V wide-range DC, it adopts RS422 serial port to remotely adjust signal frequency and bandwidth. Equipped with triple protection against over-temperature, over-voltage and over-current, it will auto shut down at 85℃. With compact 170×94×26.5mm size and -30℃~55℃ operating temperature, it is widely applied in 5.8GHz RF testing and interference simulation systems.

    Electrical Specifications (@ +28.0VDC, 25°C, 50Ω)

    Parameter

    Symbol

    Min

    Typ

    Max

    Units

    Operating Frequency

    BW

    5725

    5880

    MHz

    RF Output Power @PSAT

    PSAT

    30

    35

    Watt

    Power Gain Flatness @PSAT

    ΔGp

    ±1.5

    dB

    Harmonics @30W

    H

    -12

    dBc

    Spurious Signals @PSAT

    Spur

    -40

    dBc

    Output Impedance

    Impedance

    50

    Ω

    Operating Voltage

    VDC

    24

    28

    32

    Volt

    Power add efficiency

    Eff

    35

    DC Current @30W

    IDD

    4

    Amp

    Absolute Maximum Rating

    Parameter

    Rating

    Load VSWR @ POUT =30W

    3:1 @ all load phase & amplitude continuous

    Thermal Overload

    85°C ±5°C shutdown

    Maximum

    Environmental Specifications

    Parameter

    Minimum

    Typical

    Maximum

    Units

    Notes

    Operating Temperature

    -30

    55

    °C

    Storage Temperature

    -40

    65

    °C

    Relative Humidity (non-condensing)

    95

    %

    Mechanical Specifications

    Parameter

    Value

    Units

    Notes

    Dimensions

    170x94x26.5(LxWxH)

    mm

    Maximum

    Weight

    1.5

    kg

    Maximum

    RF Connectors Output

    N-K, Female/SMA

    DC Interface Connector

    Hybrid, D-Sub7W2, Male

    DC INTERFACE CONNECTOR

    Pin #

    Description

    Specifications

    A1

    GND

    Ground

    A2

    VDD

    +28V

    1

    ENABLE

    Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low)

    2

    TX+

    Serial Communication

    3

    TX-

    Serial Communication

    4

    RX+

    Serial Communication

    5

    RX-

    Serial Communication

    Leave Your Message