Inquiry
Form loading...
1164-1300MHz 15W RF Power Amplifier Module with  White Noise Signal Generator
PA+Signal Generator

1164-1300MHz 15W RF Power Amplifier Module with White Noise Signal Generator

ZDTECH 1164-1300MHz 15W power amplifier integrates with white noise source with 15W saturated power and ±1.5dB flatness, -40dBc spurious suppression. RS422 serial control supports white noise, comb spectrum, OFDM, LFM modulation, with over-temperature/voltage/current protection and 24-32V wide supply, compact for RF interference testing.

    ZDTECH 1164-1300MHz 15W RF power amplifier module integrates with white noise signal source. It outputs Gaussian white noise by default and supports four modulation modes including comb spectrum, OFDM and LFM. It delivers 15W saturated power with ±1.5dB gain flatness and -40dBc spurious rejection. Powered by 24~32V wide-range DC, it adopts RS422 serial port for remote configuration of signal frequency and bandwidth. Equipped with triple protection against over-temperature, over-voltage and over-current, it will auto shut down at 85℃. With 50Ω output impedance, compact 170×94×26.5mm dimension and -30℃~55℃ operating temperature, it is widely used in satellite band RF testing and interference simulation.

    Electrical Specifications (@ +28.0VDC, 25°C, 50Ω)

    Operating Frequency

    Symbol

    Min

    Typ

    Max

    Units

    RF Output Power @PSAT

    BW

    1164

    1300

    MHz

    Power Gain Flatness @PSAT

    PSAT

    15

    20

    Watt

    Harmonics @15W

    ΔGp

    ±1.5

    dB

    Spurious Signals @PSAT

    H

    -12

    dBc

    Output Impedance

    Spur

    -40

    dBc

    Operating Voltage

    Impedance

    50

    Ω

    Power add efficiency

    VDC

    24

    28

    32

    Volt

    DC Current @15W

    Eff

    35

    Operating Frequency

    IDD

    2

    Amp

    Absolute Maximum Rating

    Parameter

    Rating

    Load VSWR @ POUT =15W

    3:1 @ all load phase & amplitude continuous

    Thermal Overload

    85°C ±5°C shutdown

    Maximum

    Environmental Specifications

    Parameter

    Minimum

    Typical

    Maximum

    Units

    Notes

    Operating Temperature

    -30

    55

    °C

    Storage Temperature

    -40

    65

    °C

    Relative Humidity (non-condensing)

    95

    %

    Mechanical Specifications

    Parameter

    Value

    Units

    Notes

    Dimensions

    170x94x26.5(LxWxH)

    mm

    Maximum

    Weight

    1.5

    kg

    Maximum

    RF Connectors Output

    N-K, Female/SMA

    DC Interface Connector

    Hybrid, D-Sub7W2, Male

    DC INTERFACE CONNECTOR

    Pin #

    Description

    Specifications

    A1

    GND

    Ground

    A2

    VDD

    +28V

    1

    ENABLE

    Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low)

    2

    TX+

    Serial Communication

    3

    TX-

    Serial Communication

    4

    RX+

    Serial Communication

    5

    RX-

    Serial Communication

    Leave Your Message