Inquiry
Form loading...
20W RF PA and LNA Integrated Module
RF Module

20W RF PA and LNA Integrated Module

The B8 20W electronic fence RF amplifier module is specialized for the 880-960MHz band, integrating PA power amplifier and LNA low noise amplifier. It delivers output power of 43±1dBm with ≥25dB wide gain adjustment range, built-in ALC automatic level control, and low noise figure down to ≤1.8dB. Powered by DC+28V and supporting RS485 remote monitoring, it features compact structure and standard interfaces, ensuring stable performance and strong anti-interference capability. It is widely suitable for electronic fences, private network communication and wireless signal enhancement scenarios.

    The B8 20W Electronic Fence RF Amplifier Module integrates transmitting PA and receiving LNA in one unit. It operates at 925–960MHz for TX and 880–915MHz for RX. The module provides 43±1dBm output power, 50±1dB gain, ≥25dB gain adjustment range, ALC, ACPR≤-45dBc, EVM≤5%. The receiver features 25±1dB gain, noise figure≤1.8dB, in-band fluctuation and VSWR≤1.5. Powered by DC+28V with RS485 monitoring, standard RF interfaces, operating at -25~+55℃, it delivers stable performance for electronic fence, wireless communication and signal coverage systems.

    Channel Name

    Transmitting Channel (PA)

    Receiving Channel (LNA)

    Working Frequency

    925-960MHz

    880-915MHz

    Output Power

    43±1dBm

    -10±1dBm

    Gain

    50±1dB

    25±1dB

    Gain Adjustment Range

    ≥25dB

    ≥25dB

    Minimum Gain Adjustment

    1dB

    1dB

    Automatic Level Control (ALC)

    ≥10dB

    /

    In-band Fluctuation

    ≤2.0dB

    ≤2.0dB

    Adjacent Channel Power Ratio (ACPR)

    ≤-45dBc

    /

    Error Vector Magnitude (EVM)

    ≤5%

    /

    Noise Figure

    /

    ≤1.8dB

    Maximum Input

    0dBm

    -10dBm

    Out-of-band Spurious

    9kHz~1GHz@≤-36dBm/30kHz

    1GHz~12.75GHz@≤-30dBm/30KHz

    VSWR

    ≤1.5

    Working Power Supply

    ≤3.5A/DC+28V

    Operating Temperature

    -25~+55℃

    RF Port

    PA-IN/LNA-IN/LNA-OUT: MCX-KHD;

    PA-OUT: SMA-KHD

    Power Connector

    5569 Connector, Spacing 4.2MM, Curved Needle Seat 2*3PIN

    Power Monitoring Interface

    PIN 1: RS485A PIN 4: RS485B

    PIN 2: L/EN(empty) PIN 5: GND

    PIN 3: P/EN(empty) PIN 6: +28V

    Monitoring Type

    RS485 Monitoring Protocol, Baud Rate 9600/19200 Optional (default 19200)

    Dimensions

    130x110x21mm

    Leave Your Message