- RF Module
- Communication Module
- Drone Detection
- Direction Finding Antenna
- Phased Array Radar
- Signal Jammer
- Signal Coverage
- GNSS System
- IMSI Catcher
- Optoelectronics System
10W/20W 800–6000MHz Wideband GaN Power Amplifier Module
This is an octave-spanning GaN solid state power amplifier (SSPA) module covering 800MHz to 6000MHz. It delivers typical 10W/20W saturated output power with 40~41dB power gain and ±2dB gain flatness, featuring standard 50Ω input and output impedance matching.Designed for 24~32V wide DC supply, it draws typical 2A DC current at full power with 15% power added efficiency. Harmonic performance reaches ≤-10dBc at 10W output and spurious signals ≤-60dBc at saturation, and it continuously withstands 3:1 full-phase load VSWR. Built-in over-temperature, over-voltage and over-current protection circuits shut down the unit automatically at 85℃±5℃, with TTL enable control available. Both RF input and output adopt SMA female connectors, while DC control uses a 6-pin male socket. Measuring 115×58.5×20mm and weighing only 0.5kg, it operates reliably under wide temperature range and is widely applied in RF jamming, EMC test and measurement systems.
800-6000MHz 10W Power Amplifier Module
The model ZD-PA-800-6000-10 is a multioctave high power amplifier operating between 800MHz and 6000MHz and offering a wide dynamic range with 10 Watts typ saturated power. The employment of gallium nitride (GaN) and chip-and-wire technology in manufacturing ensures this module state-of-the-art power performance with excellent power-to-volume ratio. It is ideal for jamming, EMC, test and measurement applications. The module is equipped with alarmfunctions for over-temperature,over-Voltage,over-current,which will shut down automatically under these conditions.
Features:
- Small Size and light weight
- Instantaneous ultra broadband
- 50 Ohms Input and Output matched
- Built-In control and protection circuits.
Electrical Specifications (+28VDC, 25°C , 50Ω)
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Operating Frequency |
BW |
800 |
6000 |
MHz |
||||||
|
RF Output Power @PSAT |
PSAT |
10 |
Watt |
|||||||
|
Power Gain @PSAT |
Gp |
40 |
41 |
dB |
||||||
|
Power Gain Flatness @PSAT |
ΔGp |
±2 |
dB |
|||||||
|
Input Return Loss |
S11 |
-10 |
dB |
|||||||
|
Harmonics @10W |
H |
-10 |
dBc |
|||||||
|
Spurious Signals @PSAT |
Spur |
-60 |
dBc |
|||||||
|
In/Output Impedance |
Impedance |
50 |
Ω |
|||||||
|
Operating Voltage |
VDC |
24 |
28 |
32 |
Volt |
|||||
|
Power add efficiency |
Eff |
15 |
||||||||
|
DC Current @10W |
IDD |
2 |
Amp |
Absolute Maximum Rating
|
Parameter |
Rating |
|||
|---|---|---|---|---|
|
Input RF drive level without damage |
+10 dBm |
Maximum |
||
|
Load VSWR @ POUT =10W |
3:1 @ all load phase & amplitude continuous |
|||
|
Thermal Overload |
85°C ±5°C shutdown |
Maximum |
Environmental Specifications (Design to Meet)
|
Parameter |
Minimum |
Typical |
Maximum |
Units |
Notes |
|||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Operating Temperature |
-30 |
55 |
°C |
|||||||
|
Non-operating Temperature |
-40 |
65 |
°C |
|||||||
|
Relative Humidity（non-condensing） |
95 |
% |
Mechanical Specifications
|
Parameter |
Value |
Units |
Notes |
|||
|---|---|---|---|---|---|---|
|
Dimensions |
115x58.5x20(LxWxH) |
mm |
Maximum |
|||
|
Weight |
0.5 |
kg |
||||
|
RF Connectors Input |
SMA-K, Female |
|||||
|
RF Connectors Output |
SMA-K, Female |
|||||
|
DC Interface Connector |
6-pin socket,Male |
DC INTERFACE CONNECTOR
|
Pin# |
Description |
Specifications |
||
|---|---|---|---|---|
|
1 |
NC |
NC |
||
|
2 |
NC |
NC |
||
|
3 |
GND |
GND |
||
|
4 |
NC |
NC |
||
|
5 |
NC |
NC |
||
|
6 |
ENA |
Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low) |
POWER INTERFACE CONNECTOR
28 V power with feedthrough capacitor connectors.
Outline Drawing (All dimensions in mm [inch])
