- RF Module
- Communication Module
- Drone Detection
- Direction Finding Antenna
- Phased Array Radar
- Signal Jammer
- Signal Coverage
- GNSS System
- IMSI Catcher
- Optoelectronics System
100W 0.02-1GHz Solid State RF Power Amplifier Module
This is a 0.02–1GHz 100W solid state power amplifier module. It delivers typical saturated output power of 100W, power gain of 50±2dB and maximum gain flatness of ±2dB. With 50Ω impedance, the maximum input and output VSWR is 1.5:1, and the maximum lossless input power is +5dBm. It is powered by 28–32V DC with a maximum operating current of 15A. It adopts SMA-F for RF input and N-F for RF output, while D-Sub 7W2 serves as power and control interface, supporting current detection, temperature detection and LVTTL enable control. The module measures 170×94×26.5mm with a maximum weight of 1000g. Its operating and storage temperature ranges from -30℃ to +65℃, and it works under 5%~95% non-condensing humidity. Designed to cope with altitude, vibration and shock, it is widely used in various RF systems.
|
Electrical Specifications |
|||||||||||||||
|
Frequency Range |
0.02-1 |
GHz |
|||||||||||||
|
Saturated Output Power |
100 |
W |
Typ. |
||||||||||||
|
Power Gain |
50±2 |
dB |
|||||||||||||
|
Power Gain Flatness |
±2 |
dB |
Max. |
||||||||||||
|
Working current |
15 |
A |
Max. |
||||||||||||
|
Input and output VSWR |
1.5 |
:1 |
Max. |
||||||||||||
|
Maximum lossless input |
+5 |
dBm |
|||||||||||||
|
Operating voltage |
28-32 (DC) |
V |
|||||||||||||
|
Signal source |
Without |
||||||||||||||
|
Impedances |
50 |
Ω |
|||||||||||||
|
Mechanical Specifications |
|||||||||||||||
|
RF Input Connector |
SMA [F] |
||||||||||||||
|
RF Output Connector |
TYPE N [F] |
||||||||||||||
|
Power supply Connector |
D-Sub 7W2 |
||||||||||||||
|
Control Connector |
D-Sub 7W2 |
||||||||||||||
|
Dimension |
170x94x26.5(LxWxH) (tolerance: ±0.5) |
mm |
|||||||||||||
|
Weight |
1000 |
g |
Max. |
||||||||||||
|
Finishing |
Alloy iridite |
||||||||||||||
|
Temperature |
Operating: -30℃~+65℃; Storage: -30℃~+65℃ |
||||||||||||||
|
Environmental |
1 |
5%~95%, No condensation |
|||||||||||||
|
Note |
1. Altitude, vibration and shock are designed with considerations, but without tests and experiments. |
||||||||||||||
|
DC Interface Connector |
|||||||||||||||
|
Pin # |
Description |
Specifications |
|||||||||||||
|
A1 |
GND |
Ground |
|||||||||||||
|
A2 |
VDD |
+28V |
|||||||||||||
|
1 |
CURR |
Current Detection |
|||||||||||||
|
2 |
TEMP |
Temperature Detection |
|||||||||||||
|
3 |
Enable |
LVTTL 0/+3.3V，3.3V amplifier Open，0V amplifier shuts down，Default：amplifier shuts down |
|||||||||||||
|
4 |
GND |
Ground |
|||||||||||||
|
5 |
RSVD |
NC |
|||||||||||||
Outline Drawing
