300W 500-6000MHz Broadband RF Power Amplifier Module

This 500-6000MHz broadband PA module operates at 32V DC with typical 300W output and 58dB max gain, gain flatness ≤7dB. Equipped with RS485 monitoring for voltage, current, temperature and RF power, it adopts SMA input and N-type output, working reliably from -40℃ to +55℃ for various broadband RF transmitting devices.

Product Detail

This broadband power amplifier module covers 500-6000MHz, powered by 32V DC with typical 300W CW output and operating current of 28-32A, achieving 22% average efficiency at full power. It features 58dB maximum gain, gain flatness ≤7dB and input VSWR ≤2, with maximum safe input power up to 10dBm. Fitted with two parallel XT60PW-M power connectors and RS485 communication port for real-time monitoring of voltage, current, temperature and RF output power. With SMA RF input and N-type output, it measures 300×300×30mm and weighs 6kg, operating stably from -40℃ to +55℃, widely applied in broadband RF testing, signal transmission and electromagnetic simulation equipment.

Frequency Range		500-6000MHz
Operating Voltage		32V
Output Power		300W@47A Typical Value
Output Current Range		28-32A
Average Efficiency of Power Amplifier Module		22%@300W
Maximum Gain		58dB(Input -10dBm)
Gain Flatness		≤7dB
Standard Input Power		0dBm
Maximum Non-damaging Power		≤10dBm
Input Port VSWR		≤2(Network split test without power on)
Environmental Parameters	Working Environment Temperature	-40℃～+55℃
	Power Stability	±1.0dB@-40℃～+55℃
Power Supply Requirements		≥55A@+32Vdc;continuous wave output 300W
Power Interface		XT60PW-M*2,two parallel power supplies(to be determined)
Control Communication Interface		485 communication protocol,Supports temperature, current, and voltage detection, as well as RF output power indication. GH1.25-6PWBPZ connector
RF Input Connector		SMA
RF Output Connector		N-K
Module Dimensions		30030030mm
Weight		6kg
Mounting Holes		As shown in the structural diagram:M2.5mm*10screws