1100-1700MHz 200-250W Power Amplifier DDS Module

This 1100-1700MHz power amplifier module is powered by 32V DC with typical 200W output and maximum gain of 55dB, gain flatness ≤3dB. It adopts SMA input and N-type output, and supports RS485 for real-time monitoring of voltage, current, temperature and RF power. It operates stably from -40℃ to +55℃.

Product Detail

This power amplifier module operates within 1100-1700MHz and works on 28-32V DC. It delivers typical 200W CW output with output current ranging from 15 to 22A, featuring 55dB maximum gain and gain flatness ≤3dB across the full band. With 38% average efficiency, it has input VSWR ≤2 and can withstand input power up to 10dBm. Equipped with RS485 for real-time monitoring of voltage, current, temperature and RF output power, it uses SMA input, N-type output and XT30PW-M power connector. It runs reliably at -40℃~+55℃ and is widely applied in various RF transmission systems.

Item		Typical Values of Indicators	Remark
Frequency Range		1100-1700MHz
Operating Voltage		32V	28-32
Output power		200W	200W@19.5A Typical Value
Output current range		15-22A	@Psat
Average Efficiency of Power Amplifier Module		38%	@100W
Maximum Gain		55dB	Input -10dBm
Gain Flatness		≤3dB
Standard Input Power		0dBm
Maximum Non-damaging Power		≤10dBm
Input Port VSWR		≤2	Network split test without power on
Environmental Parameters	Working Environment Temperature	-40℃～+55℃
Environmental Parameters	Power Stability	±1.0dB@-40℃～+55℃
Power Supply Requirements		≥10A@+32Vdc;	Continuous wave output 100W
Power Interface		XT30PW-M
Control Communication Interface		485 communication protocol	Supports temperature, current, and voltage detection, as well as RF output power indication. GH1.25-6PWBPZ connector
RF Output Connector		N-K	Enter SMA
Module Dimensions		17016027mm
Weight		1600g
Mounting holes		As shown in the structural diagram(mm)	M2.5screws