Vhf 100-130mhz Outdoor 100w Omni Fiberglass Antenna
SPECIFICATION
Electrical Specifications | |
Frequency Range-MHz | 100-130MHZ |
VSWR | ≤1.5 |
Gain-dBi | 7 |
Horizontal 3dB Beam width-° | 360 |
Vertical 3dB Beam width-° | 18 |
Polarization | Vertical |
Impedance-Ω | 50 |
Max.Power-W | 100 |
Mechanical Specifications | |
Input Connector | N-female or customized |
Net Weight-kg | 1.7 |
Dimension-cm | 80*4.5*8 |
Mounting Pole Diameter-mm | 30-55 |
Operation Temperature-℃ | -40-+60 |
Relative Humidity | 5%-95% |
Main Fecture | |
Outdoor omni antenna,Cover Lora900 band,Vertical polarziation,Fiberglass Radome |
FEATURES
● The antenna has an N SMA connector cable, so it can easily be connected to the gateway and all other Helium mining machines.
● This antenna can be used in any environment that requires long-range LoRa connectivity, such as agriculture, environmental monitoring, and urban monitoring.
● Low voltage standing wave ratio:
● The standing wave ratio of this antenna is 1.1, lower than other similar antennas (the closer the standing wave ratio is to 1, the smaller the reflection and the better the antenna match).
● How to choose dBi?
Low dBI: performs well in uneven terrain or areas with high hotspot density.
Higher dBI: performs well in flat terrain and low hotspot density.
Middle dBI: is very suitable for environments that fall between the above-mentioned environments.