Leave Your Message
DF antenna wide band 300-6000Mhz omnidirectional finding antenna

Antenna for jammer

DF antenna wide band 300-6000Mhz omnidirectional finding antenna

The ZD-DFA-3060-NF direction finding antenna covers the frequency range from 300 MHz to 6 GHz. It consists of multiple antenna elements arranged in space according to a certain directional pattern. According to different direction finding methods, these antenna elements are arranged in different formations to achieve direction finding and provide high-sensitivity omnidirectional coverage without interfering with the DF array.

  • Model ZD-DFA-3060-NF
  • Channel 7 channels

product detail

ZD-DFA-3060-NF direction finding antenna covers the frequency range from 300 MHz to 6 GHz. It consists of multiple antenna elements arranged in space according to a certain directional pattern. According to different direction finding methods, these antenna elements are arranged in different formations to achieve direction finding and provide high-sensitivity omnidirectional coverage without interfering with the DF array.

Direction finding antennas are able to measure the direction from which a received signal was transmitted, this directional information can be used to determine the location of the transmission. The applications of direction finding are varied and important: navigation, search and rescue, interference identification, signal intelligence, etc.

Direction finding antennas can be used with a tripod, and each channel antenna is optimized for sensitivity and directivity in its specific frequency range, resulting in excellent azimuth accuracy.

Main features

  1. Wide frequency coverage

The coverage range is from 300MHz to 6GHz, suitable for direction finding of various radio signals.

  1. High sensitivity

By optimizing the design and arrangement of antenna elements, accurate detection and positioning of signals are achieved.

  1. Omnidirectional coverage

Provides all-round signal reception capability without direction restrictions.

  1. Interference-free design

The special arrangement of antenna elements ensures that there is no interference to the array itself during direction finding.

  1. Flexible array configuration

According to different direction finding requirements, the arrangement of antenna elements can be adjusted to adapt to various application scenarios.

Product Specifications

 Frequency Range

0.3-6GHz

DF Method

Correlative Interferometer, 10-element circular arrays

DF Accuracyb

f > 300 MHz, 1°RMS

Linearity IP3

300 MHz to 2.7 GHz:

+20 dBm

2.7 GHz to 6 GHz:

+17 dBm

Azimuth Pattern (ripple) of

Omnidirectional

Reference Antenna Element

f ≤ 1.2 GHz:

< 1dB

 f ≤1.8 GHz:

< 2dB

 f ≤ 3 GH :

< 3dB

Impedance

50 Ω

Output Return Loss

10 dB

VSWR

2.0

Compass

Embedded electronic compass

Azimuth uncertainty < 1.5° RMS

GNSS

Embedded receiver and antenna

Installation

On tripod

Connector

SMA or NF

Environmental

 

Storage Temperature

- 40 °C to + 85 °C

Operating Temperature

- 40 °C to + 65 °C

Relative Humidity

95% / 240 h at + 30 °C

Salt Resistance

2 cycles 24h salt / drying at + 35 °C

Ingress Protection

IP 65

Radome Color

Olive Green

Basic Material

Aluminum

Leave Your Message