- RF Module
- Communication Module
- Drone Detection
- Direction Finding Antenna
- Phased Array Radar
- Signal Jammer
- Signal Coverage
- GNSS System
- IMSI Catcher
- Optoelectronics System
High Stability 200W 5725-5850MHz Power Amplifier Module Liquid Cooler Design
This High Stability 200W Power Amplifier Module is a high-performance RF amplifier designed for the 5725-5850MHz frequency band. It incorporates an advanced liquid cooler design that effectively addresses thermal management challenges during high-power operation, ensuring stable performance across a wide temperature range from -40℃ to +60℃. Its high stability is reflected not only in temperature adaptability but also in excellent gain flatness and low harmonic distortion, making it suitable for demanding applications such as industrial heating, wireless communication, radar systems, and scientific research.
This power amplifier module delivers a saturated output power of ≥53dBm, with gain flatness below 1.5dB and input/output VSWR less than 1.5, positioning it at the forefront of industry standards. The module is equipped with intelligent protection mechanisms, including reverse polarity protection, over-temperature protection (shuts down at 85℃, resumes at 65℃), over/under voltage protection (shuts down above 36V or below 24V), and over-current protection (shuts down above 30A), ensuring reliable operation in complex environments.
In summary, this high stability liquid-cooled power amplifier module is an ideal choice for modern high-power RF systems, particularly those requiring exceptional performance and reliability.
|
Working Frequency |
|
5725-5850MHz |
|
Saturated Power Output |
|
≥53dBm |
|
Flatness @Psat |
|
±1dB Max. |
|
Gain Flatness |
|
<1.5dB |
|
RF Input Drive |
|
0-5dBm |
|
Input and Output VSWR |
|
<1.5 |
|
Power On/Off Time |
|
<10us |
|
Working Voltage |
|
DC+32V |
|
Working Current |
|
<20A |
|
Impedance |
|
50ohm |
|
Harmonics @ Max. Power |
|
>20dBc |
|
Non-Harmonics Spurious @Max. Power |
|
>60dBc |
|
Power Supply Interface |
|
7W2 Connector |
|
RF IN Port |
|
SMA-KFD |
|
RF OUT Port |
|
N-Female |
|
Working Temperature |
|
-40~+60℃ |
|
Enable |
|
ON-3.3V, OFF-0V (Default value-3.3V) |
|
Protection |
|
1) Reverse Polarity Protection; 2) Over-temperature Protection(temperature Over 85℃, amplifier power off;temperature below 65°C, amplifier power on); 3) Over-voltage and under-voltage protection(voltage over 36V&below 24V, amplifier power off); 4) Over-current protection(amplifier power current over 30A,amplifier power off).
|
|
Monitor |
|
4PIN Connector with DB9 Connector |
|
Amplifier Size |
|
153×123×40mm |
|
Weight |
|
<3kg |