- RF Module
- Communication Module
- Drone Detection
- Direction Finding Antenna
- Phased Array Radar
- Signal Jammer
- Signal Coverage
- GNSS System
- IMSI Catcher
- Optoelectronics System
20W V Band SSPA for Satellite and Radar Systems
A 20W V-band SSPA is a powerful electronic device that boosts radio signals in the super-high 47-51 GHz frequency range (used for satellite links and fast wireless networks). It can push out 20 watts of steady power – like a strong amplifier for invisible radio waves.Built with advanced Gallium Nitride (GaN) chips, it makes signals stronger while wasting less energy. Special cooling designs (like tiny liquid pipes) prevent overheating even during heavy use. It also has smart safety features to protect itself from extreme temperatures or sudden power spikes.Compact and tough, this "signal booster" works reliably in harsh conditions – from space satellites to military radar systems. It’s key for high-speed satellite internet, air traffic control radars, and future 6G mobile networks that need to send huge amounts of data quickly over long distances.
Features:
1.High linearity: ensures minimal distortion during signal amplification, suitable for high-precision communication and radar systems.
2.High efficiency: optimize design to improve energy efficiency, reduce heat generation, and lower heat dissipation requirements.
3.High reliability: suitable for harsh environments, with anti vibration, anti impact, and wide temperature working capabilities.
| Specification | Parameter | Value |
| Electrical Specifications | Working Frequency | 47-51GHz |
| Rated Power | +43dBm/20W | |
| Gain Adjustment | 0~23dB (Step 0.1dB) | |
| Gain Flatness | 0.5dBp-p | |
| Gain | ≥50dB | |
| Gain Stability | ±0.5dB/24h | |
| IM3 | -23dBc | |
| Spurious | ≤-60dBc | |
| AM/PM | ≤3°/dB | |
| Group Delay | ≤0.5nS p-p | |
| Noise Power Density | ≤-135dBW/4kHz | |
| AM/PM | ≤3°/dB | |
| Group Delay | ≤0.5nS(p-p) | |
| Power Supply | 220VAC (47-63Hz) | |
| Power Consumption | 160W | |
| Mechanical Specifications | Dimensions | 260×190×110mm |
| Weight | 6.0Kg | |
| RF Connectors Input | 1.85mm-F | |
| Output | WR19/BJ500 | |
| Communication Interface | LAN/RS485/RS422/RS232(optional) | |
| Cooling | Forced Air Cooling |