- RF Module
- Communication Module
- Drone Detection
- Direction Finding Antenna
- Phased Array Radar
- Signal Jammer
- Signal Coverage
- GNSS System
- IMSI Catcher
- Optoelectronics System
80W Q Band SSPA for Satellite and Radar Systems
80W Q Band SSPA uses smart technology to avoid overheating, even when used for hours. It saves energy while boosting signals and delivers 80 Watts of power which is like a strong flashlight, but for radio signals. WIth Compact size and lightweight, it connects easily to antennas, satellites, or test equipment. 80W Q Band SSPA helps send strong signals between satellites and ground stations. Also it is widely used in advanced radar for airplanes, cars, or weather tracking and supports super-fast wireless internet for crowded cities or smart factories. This SSPA is like a “supercharger” for high-frequency radio signals, making modern wireless technology faster, stronger, and more reliable!
Features:
1.High linearity: ensures minimal distortion during signal amplification, suitable for high-precision communication and radar systems.
2.High efficiency: optimize design to improve energy efficiency, reduce heat generation, and lower heat dissipation requirements.
3.High reliability: suitable for harsh environments, with anti vibration, anti impact, and wide temperature working capabilities.
| Specification | Parameter | Value |
| Electrical Specifications | Frequency Range | 43GHz~46GHz |
| Rated Power | +49dBm/20W | |
| Gain Adjustment | 0~25dB (Step 0.1dB) | |
| Linear Gain | ≥65dB | |
| Gain Flatness | 0.5dBp-p | |
| Gain Stability | ±0.5dB/24h | |
| IM3 | -23dBc | |
| Spurious | ≤-60dBc | |
| AM/PM | ≤3°/dB | |
| Group Delay | ≤0.5nS p-p | |
| Noise Power Density | ≤-135dBW/4kHz | |
| Power Supply | 180-264VAC@47-63Hz | |
| Power Consumption | 650W | |
| Mechanical Specifications | Dimensions | 422×212×175mm |
| Weight | 17.5kg | |
| RF Connectors Input | 2.4mm-F | |
| Output | WR22/BJ400 | |
| Communication Interface | LAN, RS485, RS422, RS232 | |
| Cooling | Forced Air Cooling |