0102030405
50W 4800-5300Mhz DDS RF Module Power Amplifier
specification
Name | DDS signal generator + power amplifier | ||||
Model No. | ZD-DPA-4800/5300-50W | ||||
working frequency | 4800-5300MHz | ||||
Power | 50W | ||||
Operating Voltage | 28V | 24-30V | |||
Conversion efficiency | ≥42% | @50W | |||
Adjustable output power | 30-50W | Software set power | |||
ALC power adjustment range | ≥10dB | Voltage Controlled Attenuation | |||
gain | 47±1.0dB | ||||
In-band fluctuation | ≤2.5dB | peak | |||
spurious emissions | In working band | ≤-15dBm/1MHz | Measured when the center frequency plus CW signal to the maximum output power | ||
Out-of-band | 9KHz~1GHz | No higher than normal noise floor clutter | |||
1G~ | |||||
12.75GHz | |||||
Maximum allowable input power | ≥+10dBm | Lasts 1min without damage | |||
Input VSWR | ≤1.5 | Add +28V, standard network output -10dBm | |||
Output VSWR | ≤1.35 | No power, standard network output -10dBm | |||
≤1.35 | Power On, Dual Directional Coupler Test | ||||
High and low temperature test | Working environment temperature (℃) | -10~+65℃ | Low temperature can start, monitoring works normally | ||
Gain Stability | ±1.5dB @-40℃~+65℃ | ||||
power stability | ±1dB @-40℃~+65℃ | ||||
Power Requirements | 4A @+28Vdc; | CW output 50W | |||
Power supply interface, communication interface RS485 | 7W2 | Male, 1:485A; 2:485B | |||
RF output connector | N-Female connector | ||||
with 3 LED lights | POWER: Power indication; RUN: Running indication; ALARM: Alarm indication; | ||||
physical dimension | 700M-6G:155*125*26mm; 20M-500M:155*125*35mm | ||||
weight | <1Kg | ||||
Appearance (how to use) | Signal source power amplifier integrated module (fixed on the radiator) |