6 Channel 300W Prison Jammer
product detail
Technical parameters:
- Shielding range: radius of 50-200 meters (-75dBm, in an outdoor open environment, depending on the distance of the surrounding base stations);
- Transmitting power: the total RF power of the whole machine is 300W, the total DC current: 30A; the power consumption of the whole machine is 840W, and the total AC current: 3.85A;
- Shielded signal types: 4G, 3G (LTE/TD/WCDMA/CDMA2000), GSM (2G), CDMA (2G);
- Output channel: 6 channel output, single channel 50W, power software adjustable range 5W-50W;
- Network RJ45 remote control function, which can facilitate wired or wireless networking (wireless 433M or 135M transmission);
- It can monitor the parameter information of all equipment in the entire prison at the same time, including the working status, frequency, power, temperature, voltage, current and other parameters of the modules in the equipment;
- It also has the whole machine fault, door opening state, position movement, standing wave open circuit alarm, module faults including low power, over temperature, over voltage, overload, standing wave alarm, etc.; and software can adjust the power, the adjustable range is 5W-50W.
Frequency band
|
Channel |
Working Fre |
Output power |
current |
Application |
CH1 |
791-877MHz |
50W |
4.5A |
4G |
|
CH2 |
880-960MHz |
50W |
4.5A |
4G |
|
CH3 |
1715-1880Mhz |
50W |
5A |
DCS |
|
CH4 |
1920-2170 MHz |
50W |
5A |
3G |
|
CH5 |
2270-2412 MHz |
50W |
6A |
4G |
|
CH6 |
5170-5825 MHz |
50W |
6A |
WIFI |
Host size |
L*W*H:710*435*320mm |
Total Weight |
<35Kg; |
Ambient temperature |
-40℃~60℃ |
Relative humidity |
35~85% |
AC-220V power consumption |
840W, Current 3.85A |
Power input |
AC 100V~240V |
Power Output |
DC 28V,13A*3 |
Monitoring interface |
RJ485 network port |
Installation Environment |
Wall/Pole |
Installation height |
5~15m |
Shell material |
Iron paint |
Field installation application case
In engineering applications, the host and antenna of the screen are completely
waterproof and can be directly installed in the outdoor environment:
- Select a directional antenna (plate type) according to the needs of the site;
- In order to achieve the best shielding effect, it is recommended to ensure that there is
no base station within 300 meters of the installation site;
- It can be installed by means of the roof, outer wall, or light pole of the building;